Ink pin garment use security pin with ink tag product features 1.

How to remove a ink tag. The pressure of the pins should be strong enough so that the pin eventually pops off or easily pulls apart. Aim the gun directly at the label, holding it about 2 to 4 inches from the shirt. The ink cartridge is the part of the tag that juts out of the plastic.

Basically, you wrap the rubber band around the pin until it loosens, then pull the tag out. Its frustrating but i found a super easy way to remove them without the. The section of the tag that protrudes from the plastic is where the ink cartridge is.

Step 2 scrape the melted part of the cone off with a knife. Remove printing with an iron put the item of clothing on a flat surface. Step 1 take a lighter, and melt the top part of the cone on the ink tag.

It takes about 15 seconds. Hold the larger part of the ink tag with one hand. Step 5 remove anything that is in between you and being able to.

The first step in removing a security tag with the use of a rubber band is to position the tag’s ink cartridge so that it is pointing in a downward direction.when use this approach,. Step 3 take the knife,. You can use a standard magnet to.

Scrape the melted part of the cone. It is on the opposite side of the pin, which is the round function. Forced removal will release ink and cause injury 2.