You can only drill the screws to fasten and secure the shutters when you are certain that they are well aligned.

How to put shutters on brick. Purchasing items though our links will n. Hold the shutter in a temporary position against the wall and use the holes on the frame as a guide to drill pilot holes on the brick wall. Displacing the shutter is the must thing to follow then.

However, before you screw your frame into the wall, you will need to drill holes. The break or snap off leaving the shutter hanging on for dear life or completely falling off of the. After removing all the screws, you still might see that the shutter is stuck.

Using a ¼ inch masonry bit, drill a 2 ¾ inch deep hole into the mortar in all of the pilot holes. Installing shutters into brick is easy! 1/8” and 1/4” masonry drill bit 7.

Position the shutter at the face of the brick wall and align the upper, lower and inner edges at the window trim. I will show you wha. Timberlane presents a video demonstrating the use and installation of the lag pintel and strap hinges for installing exterior shutters on a brick.

Step 7 dust away any mortar dust resulting from drilling. It’s important for your pilot holes to go as deep or deeper than the length of your screws you plan to use to hold the shutter. Repeat the same process for the other side of the window.

Repeat this step for the right side edge of your second shutter. Sorry about the piss off at the end. The cheap plastic hardware they are attached with become brittle with age.