You might need to use a small.
How to put gas in a lighter. Lift this cushion up (on the other side, not where the screw is), and the cotton that holds the lighter. At the bottom of the lighter you see a kind of cushion with a screw in it on the side. Hold the clipper downwards during the lighter gas refill.
Drop the new flint in, replace the spring, tighten the screw, and replace the box. If they are a good person in general, they’ll feel guilty for how they treated you, and that’s sometimes the best kind. Green gas is propane blended with a silicone lubricant for use as an airsoft/bb gun propellant.
Disassemble the lighter and take the following part of lighter. Before refilling, turn the flame adjuster knob clockwise so that it’s at a minimum height setting. First of all it would be a dumb thing to do as sources of ignition should be kept away from all hydrocarbon fuels.
Hold the clipper upside down and in a straight position while refilling. When they feel heard by you, they may stop their toxic behaviors. Want cheap office and windows keys!flat 10% off on all software.
This way you will avoid air entering the lighter. Wait for at least 30 minutes before refilling the lighter. Disassemble lighter and wire connection.
Remove the insulation of wire by a wire stripper and connect it with wire as per. Carefully unscrew the screw and pull it out along with the spring and small piece of metal inside. I really wouldn’t recommend using green gas in a lighter.