The interior lights and radio will come on but the engine should not be ignited.

How to program key fob for 2012 chevy malibu. Press and hold the unlock tab on the driver's side. After that release the unlock button and then press and hold the lock and unlock buttons on your key fob until the car beeps twice. Manually unlock your car door with your.

3) immediately insert the new key into ignition and turn to on position but without starting the car. Then, insert the key into the. Cycle the key to on, then off..

Enter your malibu and close all the doors. Insert a working flip key into the ignition and turn to the on/run position (just shy. Hold down the unlock button on the driver side door.

Answered in 14 minutes by: Insert your key into the ignition. Ignition key (non circle plus key blade ) 1 x ignition key.

After approximately 10 seconds the red alarm control led (next to the clock) should illuminate. Make extra copies following above instructions for 1 working key *note… you will need to call the keyless shop to have an electronic chip key made by code and cut, in order for. This is a remote with electronics and battery.

The interior lights and radio will come on, but the engine should not be ignited. Chevy key fob programming in 8 easy steps. Put your key into the ignition and turn to position 1 (radio).