Here's how to program a craftsman wireless garage door remote.

How to program a craftsman garage door remote. Press and release the button on the remote control that you wish to operate your garage door. With the lights from the garage door opener now turned off, pick up your remote and push the top button. To begin programming, locate the “learn” or “program” button on the garage door opener.

This is the large box that is attached on the inside of your garage that causes the garage to go up and. Try opening the garage door using a different remote or the switch on the wall of your garage. You might need to remove the light cover on motor housing first.

Press the learn button twice. If your garage door remote has multiple buttons up top, feel free to press any one of. This can be a standard switch with a “program” button or a “teach” button.

Check the controller type you are using. It is located on the back of the unit and is available in yellow, red, orange, or purple. Step 1 locate the “learn” button that is on the back of the mounted garage door opener.

You just push a button on the unit get a solid light then. Then locate and press the learn button once. Locate the learn button on the door control.

Make sure your new remote is the same brand as the garage door opener. Easy and quick way to change the battery and reprogram a garage door opener remote control.some remotes will not need to be reprogrammed if changing the batt. Here are a few simple steps for programming your garage door remote once you have access to all the components: