Then lower the jacks on the trailer.

How to polish pontoon logs. When sanding use a pneumatic linear sander to save time and your arms. If there is no visible buildup on the pontoons then a simple pressure wash with water will do fine. How to Polish Your Aluminum Tubes Logs.

Contains 5 easy to follow steps which will mean you get the very best results when polishing your aluminum pontoon tubes and logs. So the first thing I do is High Speed Sand with a 3500 rpm Rotary SanderPolisher it makes the sanding process much faster compared to using a DA Sander. Its only a protectant to KEEP them.

After the polish is applied buff it out with a second polishing ball or a clean dry terry cloth. Aluminum pontoons can be cleaned and polished in less time and with less material. You save time labour and money.

Again Sharkhide will NOT polish them. The trick when cleaning the toons is to do one section at a time with the tubes dry work from the bottom up and keep spraying it on until you have a nice even layer of foam. So just keep applying until its uniform then wash off good with water.

Well once you polish them yes you DO want to apply Sharkhide every 2 years to ensure they dont fade. To polish your tubes add the solution sparingly to the surfaces being cleaned and use a soft rag to spread it over evenly. This is especially true for saltwater pontoons because of the salt deposits.

Working in small sections use a circular motion or s-curve to polish the tubes with your hand-held machine after cleaning then clean once again to remove residue. 5 Steps Pontoon boat party Pontoon Pontoon boat. Spray it on let it work for 20 to 30 minutes and pressure wash it off.