Furthermore, it must be straightened to be aligned as the metal component will be your pick that will be used.

How to pick lock with bobby pin. The function of this instrument is to implement a. We will be applying pressure on this lever here shortly so. Then push the lever into the barrel as deeply as possible.

Only the very largest of bobby pins will have the length and strength to do the job. If you have 2 large bobby pins at hand, fashion them into the tensioner and pick tools as decribed. Make a slight bend at the tip of the straight end.

Follow the steps outlined below to pick your lock with the use of two bobby pins. A tension wrench a lock pick tension wrench: Bend your bobby pin into an s shape and attempt to grab onto any metal bridge that connects two wires.

Make sure you keep the lever. This is arguably the most important tool that you will use in your lock picking. The pick allows us to lift the pins to the shear line just like the key does.

Next stay it’s also not very. Add tension to the handle of this. These are the type of locks that can easily be bypassed with a bobby pin.

Insert the tension wrench insert the bent end of the tension wrench, or lever, into the bottom half of. You want to try and pull back on one wire while pushing forward on. Apply minimum torque to the tension wrench, insert the bobby pin into the keyway, make use of a vibrating motion, or scrubbing over the pins, after a few seconds, try to apply greater force to.