As soon as the tensioner is in place, you can try to manipulate the pins with the lock picker.

How to pick lock a door with a bobby pin. Apply minimum torque to the tension wrench, insert the bobby pin into the keyway, make use of a vibrating motion, or scrubbing over the pins, after a few se. Add tension to the handle of this wrench according to the lock’s turning direction. Then insert hairpin b into the middle of the lock all the way back.

There are two standard garage door locks, the spring lock, and the keypad lock. Stick the pin into the lock about one centimeter with the flat side facing upwards. The basic pin and tumbler lock has six main elements:

To achieve the right bend,. Now insert the tension wrench tool (hairpin a) into the bottom of the lock. The plug, driver pins, key pins, springs, the shear line, and a housing to hold everything together.while.

The actual lock picking happens with the picker. Push the rest of the pin towards the left while bending the end of the pin slightly. Insert the tools and start picking.

Place the shorter end of your wrench inside the keyhole’s bottom. The locks in most houses are fairly basic, making this lock picking technique fairly easy. Take off the rubber or plastic coating on the end of the bobby pin to form two sharp, fine dots.

To pick a garage door lock with a bobby pin, first, identify the type of lock that is on the door. You may need to peel of the little plastic piece at the end of the pin. This means you can walk through walls, or even defy gravity.