How to hack a lock using a soda can!

How to pick a padlock with a soda can. The middle indentation of the shim is inserted in the space between the lock body and shackle and then the shim is turned while working the shackle up and down until the shim. The bottom section should be rounded and the middle section should be rounded. Each side of the shackle will need to be independently shimmed to allow the locking mechanism to release.

Make a lockpick for a padlock using just a soda can. Watch this video and learn to hack a padlock with a soda can. The video below shows you what you need to do to get into a double padlock with just a pair of scissors and an old coke can.

Demostrative video of a guy picking a lock with. Slice from top to bottom cut the can. Combination padlocks thursday, march 1, 2012.

And it uses soda/beer cans too. In the locked position, the ball. How to hack a lock using a soda can!

You’ll need a few things to make a padlock shim, a sharp piece of metal or a small pocket knife, a pair of scissors, a permanent marker and of course an empty can. This works with most combo or keyed padlocks. In this configuration, a padlock uses two large ball bearings around the cam to retain the shackle.

How to open master double lock with a coca cola can***subscribe : When your lock won't open, cut the soda can in the middle so you have a small square. In this video i want to show you how to make padlock shims out of a soda/beer can and use a plastic practice lock to demonstrate how a shim act.