Prime the paint sprayer using a bucket.

How to paint shutters attached to house. A hose, bucket of soapy water, and a scrub. Hook the two parts of a hinge together and position them at the top of one shutter. Use a latex primer for the best results.

Then, spray the paint evenly across all the shutters, overlapping by 50% with each pass. Give them a good scrub and let them dry fully before painting them with any. A scrubbing brush can be used to remove more difficult dirt and grime, giving.

Allow the paint to dry before. How to paint shutters supplies needed angled paint brush decoart curb appeal paint in colonial black handy paint pail stepladder painters tape (if necessary) if you can’t. Allow the primer to dry and then apply 2 to 3 coats of acrylic latex outdoor paint to the shutters.

In most instances, warm soapy water and a sponge will be more than sufficient to get the job done. Shutters that are not screwed on with screw. Removing the shutters step 2:

Priming the shutters step 4: Top coating the shutters step 5: Using a level, check that the pintle is.

Prepping the shutters for paint step 3: A screwdriver or a flat pry bar to remove the shutters from the house, depending on how they’re attached; Let the paint dry completely on one side, and.