Painting a door without leaving brush marks behind:

How to paint a front door without brush marks. Otherwise, once the paint dries up, you may have a harder time peeling off the tape. Apply the first coat of. It will always be a wise decision to apply a second coat of paint to your metal door.

The purpose of sanding the door isn’t to remove all the existing. For best results when painting doors and jambs, use a paint roller. Apply your first coat of primer and lightly sand with a fine sanding sponge when the primer is dry.

Apply your primer and sand it down. I used a sanding block that was about 100 grit. Apply the second coat/topcoat and let dry.

Apply two coats, dilute the first coat of primer with water at a ratio of 10:1. Sand the surface after applying primer (if necessary). See tips for choosing a front door color here too!

Mix 1/3 paint to 2/3 water in a container. Remove the tape while the paint is still wet. Next sand the door using a sanding block.

Now you are going to apply another coat of primer, let dry and sand again. A bright purple front door alludes to. My materials list is available on my website at.