This quick video will give you some tips on how to pick a lock with just two bobby.

How to open lock with bobby pin. Put the tension wrench short bent part in the bottom hole. Gloves (optional) what to do. Create a lever and a pick using bobby pins.

What you will do, is take the bobby pin and insert it through the side of the lock (the part where the lock goes). Place the lever in the bottom part of the keyhole then turn it like a key. How to open a door with a bobby pin within 7 steps only.

Spread apart the straight and wavy ends of the hairpin. Then insert hairpin b into the middle of the lock all the way back. First verify that your door lock is tumbler pin lock.

Prise the two points slightly apart. (1) open and bend the bobby pin at the angle of 90 degree. These are the type of locks that can easily be bypassed with a bobby pin.

To open a locked door without using a key with a bobby pin, do make use of the following steps: Rate this post contents show 1 how to unlock a car door with a bobby pin 2 creating the pick and tension lever 3 picking the lock 4 picked open using bobby pins hair. Apply minimum torque to the tension wrench, insert the bobby pin into the keyway, make use of a vibrating motion, or scrubbing over the pins, after a few se.

Push the rest of the pin towards the left while bending the end of the pin slightly. Take off the rubber or plastic coating on the end of the bobby pin to form two. Stick the pin into the lock about one centimeter with the flat side facing upwards.