Put the tension wrench short bent part in the bottom hole.

How to open a locked door with bobby pin. Insert the pick into the door lock. Prise the two points slightly apart. The flat side should be the one that is facing up.

Place the lever in the bottom part of the keyhole then turn it like a key. Insert the two points of the bobby pin into the lock. To pick a lock with a bobby pin, you will require a tension wrench, but if you don’t have one, you can create one using a bobby pin.

Insert the pin into your lock approximately one centimeter deep. Take off the rubber or plastic coating on the end of the bobby pin to form two. Rate this post contents show 1 how to unlock a car door with a bobby pin 2 creating the pick and tension lever 3 picking the lock 4 picked open using bobby pins hair.

Gloves (optional) what to do. Create a lever and a pick using bobby pins. Insert the pin into the lock above the wrench, with the bend facing away from the wrench, and feel for the pins inside the lock while gently applying pressure on the wrench.

Take the card and insert it in the gap between the door and the doorjamb. Prepare at least two bobby pins and bend in a particular direction. Bobby pins also act as a lock pick, but to unlock the door, the teeth of pins should be of metal, bendable, strong enough, and must fit into the keyhole.

Easy method to use a bobby pin to open a locked door for any reason. To open a locked door without using a key with a bobby pin, do make use of the following steps: These are the type of locks that can easily be bypassed with a bobby pin.