You can probably open a locked door with a hole without destroying it by using a cord with a slipknot or rope that is thicker.
How to open a locked door with a hole. The only requirement is that the top of the door. This will free the door knob from its lock. Locate the actuator inside the bypass hole.
Push the tension wrench into the lock with the rake in hand, and twist both tools in opposite directions. Find a tool that will fit inside the bypass hole. You will bend both edges of.
Take a small allen key and insert the shorter end into the lower portion of the keyhole. This is designed as an emergency way to open interior doors with locks such as a bathroom or. Then insert a screwdriver between the wedge and the door.
For a detail video click the below link: In case of a door handle with a hole, you can use a knife or a plastic card. You might need to bend the edge of the card a little if the door surface is not flush to the frame.
Locks with a round hole in the knob on the opposite side of the locking mechanism usually lock by pushing a button. With the screwdriver in the lock, slowly rotate it until you feel it. Place a thin metal wedge behind the lock and put a little weight on it so it holds securely.
Determine the type of lock. Here are some steps to follow: Put the tension wrench in the correct position by holding it in the correct direction.