The two measurements that you need a.
How to measure for a missing v belt. Or if the belt i have is. The most accurate way to measure the circumference of a v belt is with a v belt measuring tool or using a cloth tape. If the belt you have is “notched” add an “x” to the type.
There are two measurements that we need to make sure that you get the pr. I wrap one around the pulleys, and then use a tape measure to measure the missing gap. I keep a couple cut v belts around just for this purpose.
There may be as few as four or as many as six. After the belt profile, read the two or three digit number that follows to identify the length of your belt. Bigger decks tend to have more spindle pulleys.
The second measurement that you will require is the drop, so, from the top thick section of the belt that we. Following the example below, if you have the code b98, this means the belt profile is. You also use a thin string to take this measurement and place it on a steel tape to get the correct length.
For a given belt length, the distance between the pulley axles can be calculated using the above formula if the diameters of both pulleys are known. Until i began to specify belts for hvac accessory fans and motors, i thought a belt… was just a belt. So, the first measurement that you will need to do is the top thick edge of the belt.
For example, consider calculating the. Here’s valuable information i’d like to share. Hi, my name is alisa.