A video that shows which measurements and information are important for a.

How to measure for a kitchen sink. To measure your kitchen sink drain, use a tape measure and record the length from the outside of the ring to the outside of the ring on the opposite side. Small (roughly 14 ⅝” by 15 ¾”), medium (roughly 21 ⅛” by 15 ¾”), and large (roughly 28 ⅞” by 15 ¾”). You would then add 1 inch to the total.

The standard depth is around 8. How to measure a kitchen sink what you will need step 1: Measure from the edge of the sink to the opposite edge.

Place the ruler between the bottom of the sink and the top. Using a tape measure, begin at the bottom of the sink walls just above where the walls start to curve inward toward the drain. Here are the steps for measuring a kitchen sink;

Stretch the tape across the. Kitchen sinks typically come in three sizes: A kitchen sink should have a minimum of 7.25 inches of bowl depth.

Shallower than that and your kitchen sink will run out of space for dishes fast. Using a measuring tape, measure the length across the lip of the sink closest to you when the sink is installed. Determine the depth of the sink you can measure the depth of your kitchen sink using a ruler.

Measure available width and length step 4: To measure the length, place the end of the measuring tape on one edge of the sink. Ensure that the edge of the tape meets the outside rim of the sink on that side.