Wet the sand and tamp it down until it is hard and compact.

How to level the ground for an above ground pool. However, if for any reason the ground under your facility is. In order to find the level, 1. Using the rot tiller, level the ground, particularly in the areas that are out of.

This also shows how to level gro. So, drain all the water from your pool first. Next, identify the lower and higher sections of the spot.

To save water, stop draining at halfway the level of the pool capacity. Tie a spray paint can to the other end of the string. First off, use a garden hose to evenly water.

Finally, recheck the ground to ensure it is. Compensate for the discrepancy (with help from some friends!): So here’s what you should do.

Drive a metal stake into the center. We show what we did to level out the ground for an above ground swimming pool. Mark the perimeter of the area to be leveled.

Pour sand on the low end of the chosen region and then rotate the boards until the sand is level. Do not add soil or other materials from lower regions. A loose soil would not hold water and that won’t do well for a pool project.