To level ground, start by using strings attached to stakes set at the height where you would like the ground to sit to see how much dirt you will need to put down.

How to level ground for pool on slope. Add sand layer once the ground is level, add a sand layer to smooth out the base. To level the ground for installing an above ground pool, mark out the area where the pool is going plus one foot, remove the grass/sod, determine the grade of the site, then level. Leveling usually involves mixing sand and dry topsoil to fill in any low parts.

Have the ground leveled and compact keep a leveled surface by making sure you eliminate all high hills and use the sands to fill the low hills. With the rolling tamper, you will be able to level the ground for the pool. The stake was driven into the center mark with a sledge.

If there’s any serious sloping that you can see with your eye and you don’t want the pool on a slope,. Take a measurement of the water. You must do this at multiple points across the pool to ensure the ground is completely level.

Shovel hose landscape clearing and excavating land must be cleared before leveling. Mine was 12′ x 12′ and it was a pretty big job. Map out the spot where you will place the pool.

Prep with fungicide helpful tips to know. Below are the simple steps you need to take to level the ground with concrete: 7 steps to install above ground pool on a slope 1.

Once a pool is set up it’s almost impossible to move without draining it and. There is an easy way to do this. Here is how to do it: