Shovel or rake the soil if necessary to ensure each area has a difference of no.
How to level an inflatable pool on concrete. Flat shovels or a sod cutter machine can be used to remove turf. Look at the line level will to see whether the string is level, and then measure from the string to the ground. A single layer of sand is needed.
Measure around the pool by using a line level. 1) hammer a stake into the ground where you want the center of your pool to be. If you have an intex pool and want to set it up on concrete, you can.
I used i think 4 4'x8' 3/4 foam boards (the kind with foil on one side) and duck. Leveling the ground for a swimming pool, here, the intex easyset soft side pool. If you want to check for level.
Flat shovels or a sod cutter machine can be used to. Look for the connectors in the bottom area of the pool, and get your pool to a flat and even. It's about 2 inch per 10 feet decline.
Locate the blocks for leveling on the lower area of the pool and pull all of them off. Shovel and rake the soil to get it level. Measure around the pool by using a line level.
Overall i am happy with. Between the slabs, there are about 10 inch gaps, filled with cedar blocks held together by concrete, with the surface about 1/2 inches. However, the surface must be level for the pool to sit correctly.