Light base installs with two 10 stainless steel fasteners included.

How to install navigation lights on a pontoon boat. With strips secure in place break out the roll of wire. The masthead light needs to be visible across 225 degrees and from two miles away. A masthead light is a white light at the front of the boat.

1-mile visibility red and green navigation lights. Carefully connect each wire to the strips do this using a set of pliers and the soldering iron. Keeps you your passengers and boat safer after dark.

Pontoon boat strip lights are available in a variety of colors ranging from red to blue to green. We start by going through some of the theory behind the angle navigation lights should shine an. Visibility lighting on the other hand can either be a lamp or a LED strip.

If your boat is greater than 394 feet but less than 656 feet or 20 meters you need the following set of navigation lights. These options go a long way to create the ambiance and atmosphere your passengers and crew deserve. Kits include two surface mount lights stainless steel mounting hardware and water tight power cablesconnectors that connect to a fused accessory switch on the helm.

One way to install nav lighting on your boat here we installed attwood recepticles and removable pole nav LED lights on an alumacraft jon boat. A wiring diagram is a simplified conventional photographic representation of an electrical circuit. Use a marker pen to mark the location of any navigation lights so that you know where to drill holes and connect wires through.

Variety of pontoon boat wiring schematic. Navigation lights should be mounted so as to minimize damage by contact with other objects under normal operating conditions for example lights mounted on the topsides of smaller craft can be damaged when coming alongside a wharf or pontoon and lights. The boat did have lights but they were the battery operated kind and they didnt work they had the redgreen on the front of the top and the.