Switch between heat and cool modes and change the fan from auto to on.

How to install honeywell non programmable thermostat. Pull at the bottom to remove the thermostat from wallplate. A shielded cable is not required. Align the thermostat onto the uwp and firmly snap it into place.

2)align the two brackets on the top of the thermostat with the corresponding slots on the top of. This wire goes to the g terminal on your new. If you have a c wire, place it into the c terminal on your wall plate.

17 turn your power on. How to install honeywell thermostat. Turn on the power at the breaker box or switch that controls the.

Turn on the power at the breaker box or switch that controls the. Pull the wires through the wire hole on the wallplate. Turn the thermostat over, insert fresh aaa alkaline batteries, then reinstall the thermostat.

C wire adapters are available here. Let’s look at the g wire. Align the thermostat onto the uwp and firmly snap it into place.

Install two fresh aaa batteries. 3.) mount the thermostat horizontally on the wall: