Artificial grass gives the look of a real lawn without the all the maintenance.

How to install artificial turf diy. Install common 60d nails three to four inches apart along one end and stretch the entire piece taut, then start working down the sides and center, keeping the edge nails three to four inches. Using a carpet knife/razor knife, cut off excess turf on the backside (3 stitches in from sides). Unroll gym turf and let rest.

Installing artificial grass for pets is one of the simplest and most effective ways to transform your yard into a beautiful, practical space. Cut turf (on backside) to fit area. This “opens up” the surface so that the.

Most of the grass will die making it lighter and easier to remove. In this video i'll show you all the steps required to install artificial turf in your yard, from filling and grading, to compacting, cutting, and seaming. Place the red line of your agl seam tape right down the center of the seam, and make an “s” pattern with your glue on the seam tape.

Using a power broom or a rake, brush the artificial grass so that all the fibers are as vertical as you can make them. Lay your drainage layer on the surface. Existing surface is excavated to required level.

Roll up the edge of each strip where they meet. Move turf into place and let the glue set for 15. Keep the surface dry, no watering.

To ensure the sports turf lays correctly, the turf roll should be allowed to relax for at least an hour before installation. Pin the grass with landscaping pins. Lay your glued seam tape under the turf, center of the mating edges.