If it is not too old, you may be able to utilize the electrical wiring from the old fixtures.

How to install a vanity light fixture. To install the wiring for the new vanity light: With your fixture’s backplate in hand, place it over the mounting screws so that their threads protrude through the backplate. Learn how to replace your vanity light for a quick and easy upgrade to your bathroom.

Follow these steps to install your new vanity light once you shut the power off: It’s okay to install a light fixture without a box but all of the connections have to be made within the light fixture, you can‘t have wire nuts in the wall. Place the two toggle bolts on either side of the lightbox and secure them with screws.

Turn off power to light. Once the finishing is complete, you can set up your new bathroom vanity lighting and wire it. The first thing you’ll want to do is make sure the power is off at the light or the breaker is off.

If, and only if, the fixture is listed for use as. Feed the electrical cables through the hole. Before doing any electrical work in your home,.

Partially loosen the grounding screw on the new bracket. First, unscrew each bulb from the fixture’s socket. Attach the vanity light fixture.

Take the light bulbs out of the existing fixture and remove the shades. Before you dive into the project, measure for the size of your new vanity light fixture. The fixture’s exterior plate should now be free to pop off and.