Everything you need to know to do this diy.

How to hang your skateboard on the wall. You can use a 7mm spanner to. Properly secure the wall mount plate so that it does not move after you hang your skateboard deck. All you need is a hammer, a nail, and an old shoelace.

How to hang up skateboards without putting holes in your walls. A spanner can be used for tightening these nuts. What you will need to hang skateboard deck on wall without nails 1.

First of all, you need to decide on which part of the wall you want to hang up your skateboard deck. Mark your spot on a suitable place not too close or too far from the top and. Make sure you know where you want to hang your skateboard and then just grab a nail or a wall hanger and punch it into the wall using a hammer.

Put a small washer on the screw. Step 1 thread both of the long bolts through the back of the plywood plate. If you’re going to put your skateboard on the wall, it’s best to have a drywall surface.

The long bolts attached to the mount hold your board slightly off the wall as if it’s floating so you won’t risk any unnecessary damage to the wall. This will allow you to have a nice, smooth surface to attach the board to. These two additional bolts mark the gap between.

In this video i show you how i hung up my boards. Use a 7mm spanner wrench to tighten the nuts better and secure them in their places. Made from fine grade birch plywood with.