If you want your deck to be hung, you’ll need to drill a hole in the wall.

How to hang up a skateboard deck. Now that the walls are ready and marked, it’s time to stick the plastic hooks. Then, using a drill, make two pilot holes at the top of the board on either side of the centre mark. Thread both of the long bolts through the back of the plywood plate.

So summer is finally here and we are celebrating with a summer six. Make sure it is free of any dirt, grease or debris. The plastic wall anchor should be inserted into the hole to hold the.

First of all, take a wall strip and take off the cover from either side. Measure the distance between boards. Skateboard decks can last between 2 weeks and 6 months depending on how often you skate.

Consistency is key when wall hanging: Take the wall strip and place the exposed strip onto the wall where you want to hang the. Next up, you need to measure the distance between the holes in your skateboard deck (where the trucks go).

It is quicker and easier to go straight ahead with the nails but you will notice the difference if you measure. Technical street skaters can destroy a board in a. In the last step, just place.

Once you have the measurement, you will need to draw two dots (the. Secure them in place by putting a washer over the bolts and a nut to hold it down. To solidify the pressing process, use tape to stick the pieces properly.