The spot of the screw is in the center of the two bolts and slightly above them.

How to hang skateboard deck on wall. Fishing lines or colorless strings are used for this purpose to make. Another quick method to hang your skateboard vertically on the wall is by a fishing line or any colorless string. What you will need to hang skateboard deck on wall without nails 1.

Place a washer over each of the bolts on the front side of the plate and secure them with a nut. The bottom of your deck will be on view in this technique. Mark the screw spots at this point, you will have vertical lines that are both parallel to each other on your wall, the.

To hang a skateboard with wheels on the wall, you will need to screw four screws into the wall in a horizontal line. Secure them in place by putting a washer over the bolts and a nut to hold it down. You can use a 7mm spanner to.

First, drill two large holes in between where you want your board (s) displayed, then thread these through for mounting purposes. Place two more nuts on the long. Step 1 thread both of the long bolts through the back of the plywood plate.

On the front side of the plate,. Hang your skateboard’s deck vertically on the. Now you want to mark your wall according to where you want your screw placed.

A 1/4inches (0.63cm) thick (at least to hold the weight of the deck) and a 25 inches (64cm) long nylon rope. A spanner can be used for tightening these nuts. Mark your spot on a suitable place not too close or too far from the top and.