Using your drill bit, drill a clean and straight hole into the wall, through the plaster and lath.

How to hang posters on plaster walls. Ensure that the amount of adhesive on. Mark the drilling spot and drill that spot using a drill machine paired with a drill bit. You will need eight squares total, or 12 if the poster is.

From here you will lightly tape in the molly bolt. Peel the protective strip off the back of the clip. The wall or surface where you’d like to hang your poster could be lots of different textures, which could affect your hanging method of choice.

If you need to have a little extra oomph or are concerned about an old or fragile poster, you can use a hair dryer or heat gun to release any old adhesive. You could also attach a masonry bit to a. For lighter items, simply screwing into the plaster.

Cut small squares out of removable adhesive strips. Screws (and screws with masonry anchors for heavy items) are your best choice for hanging things on plaster walls without picture rail. For pictures weighing five to 10 pounds, drive your nail or hook at a.

Drill into the plaster portion. Lathe and plaster walls were a very common occurrence in homes built prior to 1920, and even in some homes that. If you hit air, the drill will suddenly lurch.

Highly textured walls, such as. For pictures weighing less than five pounds, use an adhesive hook or velcro strip. If you hit wood, the drill will continue requiring pressure.