The easiest way to hang your board on the wall is by using a rope hanger.
How to hang a longboard on the wall. Screw the plywood plate into the. Cut a small piece of 3m tape and carry the board up the ladder. Drive the pin directly on the wheel and ensure it is straight.
I'd recommend mounting the hooks to a small piece of wood block then attaching the block (with hooks) to the wall. The cheap and easy way to hang up skateboards! It is a simple installation, and you won’t need any special tools or hardware.
Then, attach the mount plate on the wall using a screw. Place two more nuts on the long. Get a ladder to mount the board above high.
Mount the pushpin to the wall. Second, make an additional knot on each end of the rope. Afterwards, take a shoelace or a thread and insert it through the uppermost hole from the front of the deck and take it.
Measure the height between the wall and the desired height where the bottom of the surfboard will be placed. How to hang up skateboards without putting holes in your walls. I hope you enjoy this and if you.
Use a hammer to keep the wall secure. Position the wall anchor at the wall hole. Drill two holes where the lines intercept (vertical and horizontal) and push wall anchors in.