First, shut down the led light controller & remote iphone app and open it again.

How to fix your led remote. Likewise, if your led lights are not receiving the remote’s signal properly, a reset will also fix that problem. This method worked for me and i hope this video helped you out! Test your remote with digital camera.

Unplug the dimming wire from both the power supply and led strip light (see figure 1). First, turn the lights off. It takes less than a minute.

You should notice that your led strip is blinking, which is sort of the equivalent. Pull out the internal card for convenience. Led fell off from the board with copper conductors.

The joys of repairing things that are designed to be thrown away.relevant stuff:• remote control for led strip lights: How to reprogram the output of your 44/24 key led light. Hold the “fade7” key for a few seconds.

Press the reset button with a paperclip. Remove battery from controller and then reinstall. On most led light remotes, there is a small reset button located somewhere on the back or bottom of the device.

Once you have good batteries, you can test with a digital camera by pushing the buttons and. Any hiccups are usually cleared out. How to reset led light remote method 1: