This oil will end up soaking into the wood to heal the small scratch.

How to fix scratches in engineered hardwood floors. Most engineered flooring has 3/16 to 1/4 of hardwood veneer over a plywood base. It is very easy and fast when you know how, and the scratch is not a deep gouge. Make sure you clean within the scratch as well to remove any dirt and debris in the area.

Take care to not press too hard as the goal is to remove extra wax from the floor. Now that the area is clean and polished, take your wax stick and. Although you can't sand too deeply, you can use a very fine grit sandpaper to buff out surface scratches on these types of floors.

Walnut kernels have about 60% of the oil quantity in them. Users should remember to use just small amounts of wax, just enough to fill up the scratches. I remove the scratches from my new engineered wood flooring in 1 minute.

Make sure you find a kit that matches the color of your wood floors. Feather and buff the immediate area softly to aid in mixing but don’t overdo it with the brillo pads. Wax repair kit to the rescue.

Here’s how you can use a walnut to fix scratches; Wood flooring with good maintenance improves the aesthetics of your house. To ensure that the floor is completely free of dust and debris, use a soft rag and a small amount of hardwood floor.

Then, select a wax stick that complements the hue of your floor. A putty knife is usually used to apply the wax to the scratches. To repair the scratch, clean the area with rubbing alcohol.