This article will show you how to fix the broken string on your honeycomb blinds.

How to fix broken blinds string. Pull the knotted end of the cord that is under the bottomrail plug away from the bottomrail thus pulling the replacement cord through the ladder and through the bottomrail. Trim the new pull cord to your desired length, thread the wooden cap bead back on, and tie a firm knot to hold it in place. Just like in the previous set of instructions, it is easier to replace the frayed cord while the blinds are still up.

Pull out the cord and. Slide the top rail onto the shade, pulling the strings. Open the relevant cap and gently pull out the broken string.

Put the screws back into the top rail and the end. To begin, remove the top plastic vane. Cut the string 12 inches below the bottom rail.

How to fix broken blinds: Pull gently, so the cord lock is fully released. At the bottom of the blind, there are caps that cover the cords.

Now pulling the strings tight through the cord lock slide the top rail into the shade. Remove the plastic stopper from the bottom of the blinds. Using a flathead screwdriver, unscrew the plugs at the bottom of.

You do not have to go too far. Once released, the lock should allow your blinds to go down again. Once the broken blind string has been removed, feed the new.