Once dry, the leather is conditioned.

How to dye leather sandals. This stuff can be messy and it can stain. Paint each shoe with two full coats of dye. First, the leather is cleaned and prepared for the dye.

There are so many different colors you can dye them, too! This may take several minutes. I am using angelus leather preparer, which works quite well.

Using a wide, high quality brush, dip your brush in the dye, and paint your shoes using long smooth strokes. Let the leather completely dry after applying the non acetone product. Prep and oil the leather first.

Try to use a horsehair brush,. Of course this all depends on the. Remove the leather from the dye, and tap it on the edges to drain off excess dye.

Dyeing leather is performed through a few basic steps. As always, we start with a brushing to remove dust and surface dirt. Apply masking tape to the back side of the leather straps.

Next, dye is applied and allowed to dry. It’s ok if it’s still a little damp when you go on to step 4. First i dyed the leather ochre than applied hot wax with a paintbrush and dyed it over with red and again with cranberry.