Connect the garden hose and run this to a drain.

How to drain a hot tub with a hose. Open the valve to allow the water to drain out. Run out the hose to a convenient area of the garden where the water can drain out or into a sewage input/drain. It is a quick guide for draining a hot tub so that you can have an idea of what needs to be done.

Attach the garden hose to the spigot, being careful not. If it isn’t, attach a garden hose to the outflow hose to extend it. Use the primary spigot to drain most of the water, and then open the secondary spigot to drain the internal bleed lines.

Once completely drained, pull the. Before draining, it is important to turn off the power connection. Pull the drain out (usually with a slight clockwise turn), then remove the drain cap.

Once the tub is empty,. Place the pump in the deepest part of the hot tub and. Attach the other end to the vacuum.

To drain a hot springs hot tub, first shut off the power to the spa. Next, attach a garden hose to the drain spigot and wring out the water until it is clear and dry. Make sure the end of the hose is below the level of the other end in the tub.

Turn the wet/dry vac on for a few seconds, long enough to prime the hose and instigate water flow. Put the end of the hosepipe into a drain or a space away from grass, plants, flowers and your property. Turn on the hose until water and no bubbles are coming from the end.