You can handle it yourself if the leak’s source is simple to fix.

How to detect an exhaust leak. To prevent soapy water from evaporating immediately, the test has to be done on a cold engine. It likely will look rusty and either be a number of tubes, or one large tube. So wait until you can comfortably hold.

It will be where the exhaust gases exit your vehicle’s engine. First, start the engine cold and listen for the telltale ticking or. Make sure that your engine is cold.

First, pop the hood and check the exhaust manifold. The second symptoms that indicate you're dealing with an exhaust leak are when you have trouble accelerating your car. Start wrapping the pipe surrounding with exhaust repair tape you bought.

Once your car is completely cooled down, turn it on, listen for the leak, and run your hand along, but. Higher engine sound than usual. Our tips for finding exhaust leaks listen and feel.

Most of the time it is covered with a heat shield. Exhaust leaks must be repaired immediately. The leak or leaks can be found in 3 areas of an exhaust.

There are a number of ways to find exhaust leak issues. Now use a stethoscope (a funnel jammed in the end of a piece of flexible tube) to listen for leaks. Each and every leak should be covered with at least two layers of tape.