Make sure it’s flush along one edge and then hold that edge of the blade against your mark.

How to cut vinyl siding trim. Align the part you want to cut to the edge of the table and cut it in a. Then install the top piece of j. Lay the piece of vinyl siding on the workbench and mark a straight line over the point you want to cut.

When using tin snips to cut siding, avoid closing the blades completely at the end of a stroke. Use tape to measure where you want to cut the vinyl siding, then mark a mark on the underside of the siding. First, place the circular saw against the side of the siding that you want to cut.

1) cut the side channels to leave flaps that tuck between the upper. This video shows how to properly trim around fixtures when installing vinyl siding. How to cut vinyl siding best practice.

Draw your line, set a straightedge along the line, and draw a sharp utility knife. With a utility knife or scoring tool, score the vinyl face up with medium pressure and snap it in. Mark the part of siding you want to cut.

Make the line dark or light enough so it. Before you get excited and start cutting your vinyl siding, you want to make sure that you have accurately measured the length that you want to. Push one side of the siding toward the end of the table until the cutting mark is a little bit past the side of your table.

Place the blade on the siding where you want to. Place a few vinyl siding strips on a level workbench. If you've ever cut glass or drywall, you know the basic procedure for making a longitudinal cut on vinyl siding.