It would be best if you marked on your porcelain or ceramic tile and setup for the cut.

How to cut porcelain tile without a wet saw. You basically slide the blade across the tile, apply pressure to the levers on top and pop the tile splits along the cut line. Check out the pieces of paper ensure that the pieces of paper have similar sizes and shapes of the tiles to be. The process is similar but a little more detailed than cutting porcelain or ceramic tile.

Place the cutter on the edge of the tile, where you have marked it. I demonstrate an l cut, a straight cut and an outlet cut (square cut). Push the tile towards the blade and cut an inch for small tiles go till 2 inches for larger tiles and turn it off.

How to cut porcelain tile without a wet saw steps involved… step 1: Grab the handle and push it forward to reach. Take measurements place your tile.

Use a marker to indicate the area over the porcelain tile that you want to cut. This tool is the best way to cut a porcelain tile without chips and cracks. Here’s a quick tip for you:

Make sure your wet saw tank is loaded with water. Adjust and lock the guide of the tile cutter. Obviously you don’t want a bunch of.

Mark each piece with a pencil or chalk along the line where you’ll be cutting. We also have a guide on cutting glass tile without a wet saw. Step #2:place the nipper hold the porcelain tile in one.