Place the plank on a cutting board or other surface that will protect your flooring.

How to cut laminate flooring with a knife. Repeat steps 2 and 3 for the. Lay masking tape on the cut line and draw a sample on. How to cut laminate flooring with a utility knife how to cut cleanly with a utility knife ron hazelton 7 unusual household uses for a utility knife bob vila how to cut laminate flooring without a saw.

Use your square and pen or pencil to make a straight line over the face of the board. Tools for cutting laminate flooring. The blade should be spinning and cutting into the board.

Next, make a minor cut with a cutter to mark the saw lines. Accurate cuts start with accurate measurements, and it doesn’t matter how straight your cut is if the line you’re following isn’t. Measure the length of a crosscut with a tape measure and draw a line on the back of the board, using a pencil and straightedge.

Position the jigsaw on one end of the first cut, with the jigsaw blade at the waste side of the cutting line and the shoe snug. First, see the thickness of the planks and measure them. To do this, you will need to first draw a straight line.

How to make straight cuts in laminate countertops with a jigsaw. However, using a diamond blade is recommended as laminate can be tough to cut. With your board market to cut, head to your sawhorses or workstation and secure the plank.

In this guide, we'll talk about how to cut laminate flooring and what tools you will need +971502136026 | make a free appointment | info@fixingexpert. Make sure it is securely clamped in place with enough clearance for both yourself, as well as. Draw out your cut line on.