This time, however, you only.

How to cut acrylic sheet with a jigsaw. How to create cutting plexiglass with jigsaw#mindmadedesigns#ledmk2 Draw the line that you want to cut. How to cut a thick sheet of plexiglass (with a circular saw, saber saw, table saw, or jigsaw) for thicker sheets of plexiglass, cut with a power.

Check that the shoe is set down flat on the surface of the workpiece, and that the blade is not. Use a straight edge as a guide to cut into the acrylic sheet along a marked line. A blade with 24 or more teeth is ideal for cutting acrylic.

Put the sheet over the hard edge. Use a straightedge to draw a line where you’ll make. Position the jigsaw on one end of the cut, taking care to align the jigsaw on the cutting line.

Depending on the type of blade you use, you will ;. Carefully insert the jigsaw blade into one of the starter holes, and align it with your cutting line. So use a marker to draw the line.

First, push your circular saw into the center of the sheet so that its finest blade is almost. Hold the yardstick to the line, and run the utility knife or glass cutter along the yardstick to score the sheet. Insert a 561 bit into the dremel.

Once you’re ready to cut, turn on your jigsaw at a moderate speed before gently. The bit is for acrylic and other applications. Repeat the step 3 about 10 to 15 times to deeper the score in the plexiglass.