If that works then try it over the wifi connection and let me know what you see.

How to connect to a video conference using ip address. Enter the pairing code shown at the splash screen on the TV Polycom device. There are security configurations in. I see we are most likely running into network issue when tiring to make calls work.

I would like you to try this. Is that since the connection to the endpoint must be initiated from inside the network and cannot come from the outside it is impossible to connect into the network uninvitedThis security provided by NAT causes a headache for videoconferencing over IP. Ensure that the network core devices are configured to allow many and rapid UDP-RTP packets from single IP address sources.

For example systems and locations using ISDN H320 can seamlessly communicate with other locations using IP or Internet connections H323. Dial hosts video address or IP address The hosts video address in the format of webex. H323 IP address US West listed in the invitation.

Join or start a meeting from PC. Dial the IP address found in the meeting invitation or on your Cloud Room Connector page from the Polycom device to reach the splash screen. For example say that mycompanycallsl resolves to the IP address 722812046.

Via Ethernet or Wi-Fi. Enter Bl-uits-cib-125vciuedu and then right-click the contact that appears and select Start a Video Call. Connect to IP address 96244192118 over your G3 connection.

Transcoding is an option available on video conferencing bridges that allows conferences to be established with participants using different video conferencing formats. So for a Polycom RealPresence Desktop PC CODEC or mobile location you enter the IP address in the dial window and click Join. It is believed the other side is using a cisco web conferencing system.