You can hook one end to the fitting at the top of the pump and the other end to the filter.

How to connect above ground pool pump and filter. Attach and secure with hose clamps at. If your hose is connected correctly, you can attach it to the hook up above ground pool vacuum skimmer that is mounted to the side of the pool via the vacuum adapter plate. I'll show you where all of the hoses connect and where the g.more.

Usually, the fitting you want will have a “pump in” marked on it. Take one of the strainer connectors and the inlet jet nozzle attach both to secure the hose (inside of the pool) place a hose seal ring on the upper port of the filter pump attach the. Some tools we suggest having on hand to help make the process easier:

Installing a new pool pump and filter on an above ground swimming pool requires you to follow a few basic steps. Lock down the hose that is over the pipe with a hose clamp. Make sure to locate it near the skimmer.

The pump i installed on this pool was a different model than. First, make sure that the filter is level and elevated from the ground. Use a pair of water pump pliers to tighten and seal the connection.

Connect a single pump hose to the skimmer pipe located below the skimmer basket. Place the sand filter close to the pump. I recommend using pavers to create a solid level base for the filter to sit on.

Check the skimmer at least once. When connecting threaded pvc piping, wrap the threaded sections of the pipes in. Here is what is included in this kit: