Don a pair of gloves.

How to clean wax bowl. Remove the main piece of the wax seal from the base of the toilet by placing a rag or paper towel over the seal and grasping it with a gloved hand. Next, clean the surface of your jacket using a sponge and clean, cold water. When scraping up wax, run your scraper or plastic putty knife under a hot tap.

Use a dull knife or plastic scraper to pop the wax out of the well. Simply place your warmer in the. Use a putty knife to remove.

Fortunately, isopropyl alcohol comes to the rescue once again. Pour some of your preferred cleaner, such as oil, into the container and allow some of the wax to be dissolved away. Stuff a rag in the drain pipe.

If you have opted for the former, you can leave the balls in the dish as they will gradually absorb most of the liquid themselves. Cleaning an improvised wax warmer step 1: Once you’ve poured out all of the wax, pour in equal parts white vinegar and water into the reservoir.

This may sound crazy at first, but using your freezer is one of the cleanest ways of removing used wax from your warmer. It should only take a couple of hours to freeze the wax, but for best results, leave them in overnight. This will help to dissolve any remaining.

I recently got this ne. Using alcohol in your pipe helps to dissolve the gunk that is stuck in your bowl, while. Be sure to squeeze any excess water out of the sponge to avoid soaking the fabric and don’t use soap.