There is an easy way to do this.

How to check if ground is level for pool. Remove all the grass by. Mark the spot where you’ll place the pool. One of the easiest ways to tell if a pool is out level is to look at the water level in relation to the horizontal grout line around the pools edge.

Make a border step 3: Get rid of the grass and stumps step 4: When installing an intex pool, you will need to find the most level location on your compound.

Do a visual inspection to check for any spots. Digging down to ground level may also be complicated by the stoniness of the soil under the sod or the presence of large roots. Mark out your pool perimeter step 2:

For the plank board, lay it flat across your proposed pool and take note of its levelness. It’ll streamline leveling the ground. For pools, if the level is off by three or.

Use a rake to spread the sand evenly in the area and check the level with the plank. Here is how to do it: To level the ground for installing an above ground pool, mark out the area where the pool is going plus one foot, remove the grass/sod, determine the grade of the site, then level.

Needed items featured in the video below: Take the time to level the ground the first time. A laser or string level is best, but a long, straight wooden plank and a bubble level.