Once the spare manual key is pulled out, focus on the same tab and slide the back of the key to remove the.

How to change the battery in a toyota prius key fob. Next, insert the mechanical key into the shallow slot next to the key holder and twist. Pull the physical key out. The first that you need to do is to remove the key from the housing.

To do this, you will have to slide the mechanism that you see. Based on experience with a toyota camry, expect to replace the battery every two years in order to assure reliability. To start the car, insert the key into the ignition and turn it to the on position.

You can do it at home, and it takes 2 minutes. However, i waited on the primary fob battery to die before. 2) with the fob buttons facing down, slide the spring.

Press the metal button above the manual key to remove it from its housing. Cr1632 coin battery 🪙 you need: It should only cost about $2.

Once you locate the sliding tab, pull the spare manual key out in one swift motion. If done correctly, the entire key fob will separate down the middle, revealing the battery. At a toyota service center, they.

By sliding the tab away from the ring and holding it, you can pull the spare out of the base. Follow these steps to change the car key battery on a toyota prius: Use the key to pry.