Turn it to the right.
How to change sprinkler solenoid. Clear the area around the valves to avoid getting anything inside the valve when it is open. Orbit sprinkler valve solenoid replacement. Only a few parts can go bad on a valve, the.
This turns the the valve on if it is off but is also necessary as a first. When you get to the valve, you can just unscrew it counterclockwise. If you try to do this yourself, turn off the power and the water to the sprinkler head before you start.
The valve solenoid may get stuck open, allowing all or a trickle of water through at all times. Also, when opening the valve, be particularly careful. Once you unscrew the solenoid cap, unscrew the plunger, making sure you have a good grip of this part so as not to lose it.
If you have this problem, it’s very likely the solenoid. Remove the wire nuts attached to the existing solenoid wires and disconnect the two wires. You will notice that the manual.
Once you have determined which valve, adjust the control on the valve to a low setting by turning a knob on top of the valve. The first way to open this valve is to open the manual bleed screw. Unplug the rain bird control box so there is no power going to the valve wires.
From vehicles to industrial tools, there are many products that use pneumatic systems. That means your sprinklers will. How to rebuild a sprinkler valve.