There are a total of 6 steps for you to change the battery in the prius key.

How to change prius key battery 2010. By sliding the tab away from the ring and holding it, you can pull the spare out of the base. There is no need for additional tools if your prius was manufactured in 2010 or later, as it has a key fob with a panasonic 1632 battery. Set aside the top half of the key fob that contains the rubber buttons.

Next to where it stows you'll see an opening in the plastic fob case into which the tip of the metal key fits. Pull the physical key out. Cr1632 coin battery 🪙 you need:

Pull the physical key out. Once the key is out, you need to slide the same tab over and hold it, while sliding off the. Remove the mechanical key from the.

Start by removing the key chain from your key fob. After removing the case, you will observe four tiny screws. Lift the green plastic remote control unit circuit board out of the bottom half of the fob.

Slide the tab at the bottom to the left and drag the key. To start the car, insert the key into the ignition and turn it to the on position. With all doors closed, sit in the driver’s seat with both the ignition key and the key fob.

5 easy steps to programming a key fob ( car key guide) step 1: Once the spare manual key is pulled out, focus on the same tab and slide the back of the key to remove the casing of the prius key. To be able to change the battery, you need to remove the key cover first.