Raise the stern first and then secure it before heading to the midsection and repeating the process.

How to bottom paint a boat on a trailer. There are a few things that need to be considered before beginning this. Put it back on the. I plan to slide the timber under the stern, remove the stands, sand and.

Be sure to wear gloves when using any of these solvents. Only open one can of durabak marine paint at a time and stir thoroughly. Make sure the boat is level and not tilted to one side.

A paint stripper, scrapper and brush will be required for this task. Let the water do the heavy lifting. The bottom is now painted, with the exception of the portion where the boat stands are holding the hull.

Apply a thick layer of paint stripper to the entire bottom of the boat. After removing any detachable elements from. You need to remove rust before any new paint goes.

Place the boat stands under the hull of the boat so that the bottom is raised up off the ground. Paint the bottom around the bunks, let it dry, launch the boat, readjust your upright guides, if so equipped, by half a foot to port or starboard. For stability purposes, mount the trailer to a vehicle.

Launch it in the yard, prop one side up and paint; As i stated in the vi. Establish a cradle for the boat to rest on.