The next step is to actually barricade the window.
How to board up a window. In order to fix a broken window, you will need to find a piece of plywood or a wooden plank that is big enough to cover the entire broken window pane. Build it up, break it down. Add 8 inches to each measurement to allow.
Be very careful while measuring the plywood sheet and cut it to the right size using a circular saw. Carefully measure, cut and drill. Arrange the plywood and after drilling into the siding, give it a good tug.
If your window or door is bigger than a 4×8 sheet of plywood, install your sheets butted up against each other and use 2×4 boards over the seams to connect the pieces of. Windows with wood frames can be boarded up by screwing the plywood boards into. When it comes to the plywood’s size, start by.
We suggest a spacing measurement of 12 to 16” for drilling. Drill pilot holes for the lag screws at each reference mark. How to board up a window from the inside.
Once you have acquired the necessary item to unbarricade, move towards the window or door that you have boarded up. The recommended thickness of plywood, used for boarding up windows, is 5/8 of an inch. Windows and doors that are larger than the sheet of plywood require joining two sheets together with 2×4 bracing along the seam.
Find the right building materials. A broken window requires boarding up to protect the structure's interior from wind, sun and water damage. Wooden planks, nails, and a hammer.