Do not use so much bleach that the cloth is.

How to antique a mirror with bleach. Creating the antique mirror patina. Secondly, the next step in creating a diy antique mirror is to use a solution of bleach and water 50/50 mixture in a spray bottle and lightly mist over the. The most common way of antiquing a mirror is by stripping its back layer.

Once the mirror is dry and clean, spray the entire back of the mirror with spray paint. Pour just enough bleach onto a clean, dry cloth so that you can wipe the mirror thoroughly. Pour the antique solution into the trigger bottle supplied and from a distance of approximately 500ml apply the solution in selected areas, or if you require a heavier distressed.

You’ll be left with a cool,. Pour bleach onto a clean, dry cloth. Citristrip can get messy, so you’ll want to lay some plastic sheeting or several layers of.

Wait a few seconds (maybe 10 or 15?) and then wipe off the glass. Remove some of the reflective material. Make sure where are no drips of bleach left on the mirror or you will end up with streaks from the bleach dripping down the mirror when you hold it up.

Strip the paint off the mirror. Bleach, paper towel, gloves, paint stripper, spray bottle,. Then working quickly while the vinegar is still wet, spray the looking glass all over.

Apply muriatic acid to the. After some trial and error, i'm finally ready to share with you the easiest method i found to antique a mirror with natural looking results (and no harsh che. Hold the mirror up in.