The simplest way to change the amount of water coming out of your impact sprinkler is to tighten (clockwise) or loosen.

How to adjust sprinkler head. The easiest thing to do for adjusting an impact sprinkler head is to alter the water flow at the source. You can also hold it and turn the entire sprinkler head to change the arc. Turn the water off and disable the timer so.

The rule is simple here; Switch on the sprinklers and allow them to cycle several times. Squeeze the tabs and set one to the right most part and the other one to the.

This is the “right stop.”. Turning the screw counterclockwise will widen the spray pattern. The whole perimeter of the nozzle will spray.

Remove the old filter mesh screen. Gently turn the sprinkler head from the left and then to the right. Locate the plus and minus signs on the top of the rotor head.

Push the tabs on the nozzle to the desired level to change the water output’s speed. This is going to enable you to make all types of adjustments to the head. Turn on the sprinkler and then let it rotate about 3 or 4 times.

Check where the arrow is. Slide the two friction collars to change the spray pattern. Finally, adjust the spray distance using the.