We’ll go through three troubleshooting reasons you may not be getting the most.

How to adjust coilovers for smooth ride. Better weight distribution allows for even pressure on. This will ensure that you are getting the perfect suspension system for your car’s needs. Step 1, loosen the fixed nut.①.

To adjust your vehicle’s ride height, simply detach the bottom of the shock from its correlating control arm then either spin the lower mount up the threaded shock body to lower. Essentially, because our springs are linear, the only way to change ride height would be to use a totally different spring with a different spring rate. The first thing you’ll want to do is make sure your jack stands are tall enough to allow your suspension to safely unload.

If you want a decent ride, you cannot have. Basically, move the preload base ring/spring perch up the coilover until the spring is touching both the base ring/spring perch and top hat of the coilover. However, if you raised the ride height by using the lower spring platform, once the softer spring was installed, you would have raised the car and pushed the damper piston up.

If you go with a. To adjust the height on fully threaded coilovers, you have to adjust the lower perch by moving it up or down. Step 2, used the wrench to loosen tighten nut.②.

To do this, set the vehicle to the desired ride height and measure center to center between the upper and lower shock mounts. To adjust your bc coilovers height, multiply by 2 and use as the adjustment value. So make sure you get a low enough spring rate if you want a decent ride.

Then determine the desired mounted length. Adjusting the rate at which the weight is spread across your tires and how quickly it moves across the tires can be adjusted with coilovers and. You should not use the spring for height adjustment at any cost.